Payment & Shipping Terms:
|Fan Feeding Machine
fiber pillow filling machine,
fiber stuffing machine
Sofa Fiber Opening Machine , Fan Feeding Machine For Cotton And Foam
Suitable for different kinds of short fiber's opening like the fiber, cotton, wool and feather, and makes the materials to be average to mixing, and filling fast and average.
Installation and test
The machine should be placed on the flat and hard floor, adjust the foot screw of the machine, screw them into horizontal floor and lock them;
Connect the fiber exit with feeding inlet by the plastic pipe, make sure there is no leak.
Connect the opening machine and filling machine into the power of 380V/50Hz/63A 3phases electrical controlled box (prepared by customer). Make sure the direction of motor the same with the mark of the arrowhead on the machine.
Connect the power line of filling machine into the electrical controlled box of opening machine.
For Mixing container machine ESF005H-1200X , have to place the mixing stick or axes inside together flatwise in order to ship conveniently .then have to install them across when using it .
Make sure the grounding is fine.
a. Order of setup: first setup the filling machine to make the running the filling machine work well. ( Note the direction of motor the same with the mark of the arrowhead on the machine)
b. Setup the opening machine, after 30 seconds of running then the machine will work well, then setup the switch of back or forward, check the direction of running belt is correct.
c. Fiber feeding: put the fiber on the conveyer belt averagely. Do not put too thick to prevent the jam in the roller.
d. Filling: Take the pillow or sofa cover into the filling exit, press the foot valve by foot and belt feeding will begin, then the fiber will be filled into pillow or sofa cushion.
e. After the fiber filling into pillow or cushion is full stop off the foot valve.
f. electrical steelyard show the cushions weight when filling fiber , it is very
convenient to control its weight .
(Note when the system machine work normally , its metal annunciator in the opening machine ESF005A-1A also work .When they work , there is any metal on the conveyer belt , metal annunciator can detect and give an alarm , at the mean time , the system machine stop work . )
Clean the fiber between the rollers and exit and the valve of filling machine.
Adding the lubricant to pneumatic component of oil and mist.
i Keep the machine and working environment clean.
When fiber feeding, don't put arms into fiber exit to prevent the danger.
If there is any abnormity, press the stop knob in the electrical box.
Forbidden to use the non-polyester fiber to open, including the flame fiber, long silk, shredded fabric, with metal things, wooden or bamboo things, to prevent the damage of the machine
If the polyester fiber is damp or into block, it should be insolated and loosen, then to open.
Keep the expedite of the fiber exit, if there is jam, will make the machine burthen or damage the machine.
When working, do not open the panel, because the speed of the rolling is 2000rpm.Our company
Shenzhen Xinqunli Machinery was established in January 1995, is the first professional engaged in developing and manufacturing of sofa making machinery. Xinqunli committed to its mission "Dedicate itself to innovation, pool the wisdom and efforts of everyone" in order to achieve industry upgrade. And, to give further impetus to the sofa industry by standardization, mechanization and use of advance information technology.
Xinqunli' s products has obtained the ISO9001 international quality system certification, CE product certification, they passed the detected quality indicators of the National Woodworking Machinery Testing Center as well as awarded a number of national technical patents. Moreover, Xinqunli ha professional technical teams which provide wide range of services, such as technical advisory and manufacturing workflow planning consultation. It alson supply professional sofa making machinery. As an industrial leader, the Company not only owns over 80%of the market share in the PRC, but also has significant amount of export sales. Packaging & Delivery
wooden packing as export standard
7-15 working days after payment
Contact Person: Gordon
Tel: +86 18038178075